6
Warning
When used with Electro-surgery equipment, you must give top priority
to the patient safety.
Warning
It is recommended that you check if there is any damage on the monitor
or the accessories regularly, if you find any damage, stop using it,
and contact the biomedical engineer of the hospital or our Customer
Service immediately. In addition, the overall check of monitor, including
the safety check such as the leakage current, should be only performed
by qualified personnel once every 12 months.
Note
Please choose the computer which should be ensured compliance
with the requirements of IEC 60950, or else it may damage the device.
Note
The software was developed per IEC60601-1-4. The possibility
of hazards arising from errors in the software program is minimized.
Note
The monitor shall comply with the standard EN1060 series:
Part 1: General requirements;
Part 3: Supplementary requirements for electro-mechanical blood
pressure measuring systems (in course of preparation).
Caution
At the end of its service life, the product described in this manual,
as well as its accessories, must be disposed of in compliance with
the guidelines regulation the disposal of such products. If you have
questions concerning disposal of the product, please contact us
or its representatives.
1.1 General Information
Environment:
Temperature Working
5~40 (˚C)
Transport and Storage
-20~55 (˚C)
Humidity Working
15%~80%
Transport and Storage
≤
95 %
Altitude
700hPa~1060hPa
Power Supply
3 (V) DC
P≤3.0VA