10
Chapter 2
GETTING STARTED
• Open the package and check
• Dry battery installation
• Power on the instrument
• Connect patient sensors
2.1 Open the Package and Check
Open the package and take out the equipment and accessories carefully.
Keep the package material for possible future transportation or storage.
Check the components according to the packing list.
• Check for any mechanical damage.
• Check all the cables, modules and accessories.
If there is any problem, contact the distributor immediately.
2.2 Dry battery installation
The instrument will be supplied with two ‘AA’ alkaline batteries or high
capacity. Before using the instrument, you shall put the battery in the battery
box in the back of the monitor.
Note
When you don’t use the equipment, you should take out the dry
battery.
2.3 Power on the instrument
Press button to power on the instrument. The indicators will flash once,
which shows the boot-strap is success, then end pressing, the system will
enter into the main interface.
Warning
If any sign of damage is detected, or the instrument displays some
error messages, do not use it on any patient. Contact biomedical
engineer in the hospital or our Customer Service Center immediately.
Note
Check all the functions that possibly be used and make sure that the
equipment is in good status.
OK