Gill Instruments Ltd
_____________________________________________________________________________________________________________
________________________________________________________________________________________________
MaxiMet
Page 65
Issue 1
Doc. No. 1957-PS-000x
March 2015
WindStat Codes
8.4.
Safe Mode
If a unit is received that will not communicate or the configuration settings are not known then Safe
Mode can be used to establish communication with the MaxiMet and change configuration settings
(see Para 6.8).
8.5.
Bench Test
See Para 4.2.
8.6.
Returning Units
If the unit has to be returned, it should be carefully packed in the original packaging and returned
to your authorised Gill distributor, with a full description of the fault condition.
8.7.
Guarantee
For terms of guarantee contact your supplier.
Warranty is void if the unit is damaged or broken.
Code
Status
Condition
Code
Status
Condition
0000
OK
No fault conditions detected in
measurement period.
0001
Wind Sensor Axis failed
Wind U Axis blocked or faulty
0002
Wind Sensor Axis failed
Wind V Axis blocked or faulty
0004
Wind Sensor both Axis failed
Wind U and V Axis blocked or faulty
000B
Wind Sensor readings failed
Wind Sensor data output fault.
0100
Wind Average Building
WMO wind average building.
0200
Corrected Wind Measurement
not available.
Compass corrected wind measurement
failure.
A
NMEA Acceptable Data
No fault conditions detected in
measurement period.
V
NMEA Void Data
Fault condition detected in measurement
period.
