Gill Instruments Ltd
_____________________________________________________________________________________________________________
________________________________________________________________________________________________
MaxiMet
Page 4
Issue 1
Doc. No. 1957-PS-000x
March 2015
1.
FOREWORD
Thank you for purchasing the MaxiMet manufactured by Gill Instruments Ltd.
To achieve optimum performance we recommend that you read the whole of this manual before
proceeding with use.
Gill products are in continuous development and therefore specifications may be subject to change
and design improvements without prior notice.
The information contained in this manual remains the property of Gill Instruments and should not
be copied or reproduced for commercial gain.
2.
INTRODUCTION
The Gill MaxiMet sensor units are very robust with no moving parts. The sensor units, output rate
and formats are all user selectable.
The MaxiMet can be used in conjunction with a PC, data logger or other device.
The MaxiMet combines all the instrument data into a single data string. This may be configured for
digital ASCII RS232/RS422/RS485 (2 wire point to point), digital MODBUS RTU/ASCII, NMEA and
SDI-12 outputs.
