FlexPay NC3L Wide Installation and maintenance
30
8 . 2 .
P R I N T E R Z E B R A K R 2 0 3
8.2.1.
LED diagnostic
Blue Feed
button:
•
Press and release will feed, cut, and present a complete page.
•
Any data in the print buffer will be printed.
If the buffer is empty the page will be blank.
In black-mark mode, the page will be synchronized with the black-mark.
•
On printer with firmware 3.83 and higher, press and hold Feed for three seconds while
turning on the power, or press and hold Feed just after closing the print head, will print a
self-test printout.
•
Press and hold Feed while turning on the printer or press and hold Feed just after closing the print
head, to print a self-test printout.
•
Press and hold Feed while closing the print head and the printer will enter top of form sensor
calibration mode.
Power indicator
button:
•
When the green power indicator is illuminated, a 24V supply is connected to the printer.
Status indicator
button:
•
ON constantly
— the printer is operational.
•
Flash, flash, pause, flash, flash
— is the warning-code for paper low.
The warning-code is reset automatically when the condition causing it is removed. This
behavior can be enabled by setting parameter 52 (Warning Level) to 001.