FlexPay NC3L Wide Installation and maintenance
21
6.
ELECTRICAL INSTALLATION
This manual describes the electrical installation and maintenance of the NC3L.
DANGER
Before performing any electrical operation make sure that all devices have
been disconnected from the mains power.
Before performing any electrical installing/uninstalling operations, make sure
that also supply lines are isolated from mains by safety disconnection devices.
WARNING
This device must be installed into an electrical system complying with the plant
engineering regulations in force and equipped at least with a 2-pole, 6A, C
curve, MCB differential for each supply line.
The electrical cables used for connections must comply with the plant
engineering regulations in force, depending on the installation conditions (e.g.
indoor or outdoor underground, in cable duct, etc.) and they must meet any
functional characteristics prescribed by Gilbarco.
