60
Creating/managing access profiles
Gigaset SL75 WLAN / en / A31008-M700-B112-1-7619 / settings_net.fm / 24.4.06
Ve
rs
ion05.
08.2
005
u
If you have not yet saved any access
profiles, the list of available access
points is displayed. Proceed as
described above under "Creating a new
u
If you have already saved an access pro-
file, you can either select an existing
profile or create a new profile.
Creating a new access profile or using
a known access profile
Requirement
: You have started the con-
nection wizard and have already saved at
least one profile.
Use exist. Profile
/
Create new Profile
Select and press
§OK§
.
Using a known profile and establishing a
connection to the WLAN and SIP provider
The list of all saved access profiles (profile
overview) is displayed. The current signal
strength is displayed for each access
profile (0 = no signal, 4 = very good sig-
nal).
Sequence of access profiles:
u
The active access profile if applicable
u
All saved access profiles according to
the current signal strength (good to no
signal)
q
Select an access profile and
press
§OK§
.
The connection to the WLAN and SIP pro-
vider is established.
If the handset cannot establish a connec-
tion to the WLAN with this access profile
(no/poor signal):
¤
Change location if possible.
§Re-Scan§
Press the display key to repeat
the search.
The profile overview is displayed.
Creating a new profile
The list of available access points (SSIDs) is
displayed.
q
Select an access point and
press
§OK§
.
Proceed as follows if the required access
point (SSID) is not displayed:
<Manual Config.>
Select and press
§OK§
.
The connection wizard creates a new
access profile and opens the profile editor
(page 59).
The connection wizard may copy the
WLAN and provider settings of a saved
access profile.
¤
Make or adapt WLAN/provider settings
Creating/editing an access
profile without the
connection wizard
v
¢
Ð
¢
Network Config.
¢
Access Profiles
If no access profile is available yet, a new
access profile is created automatically.
If access profiles have already been saved,
a list is displayed.
If necessary, create a new access profile:
v
Open menu.
New Entry
Select and press
§OK§
. A new,
blank access profile is created.
In both cases, the profile editor is dis-
played (page 59).
¤
Make WLAN/provider settings
Note:
If you wish to create the new access profile
based on an existing profile: create a new pro-
file and copy sections (e.g. WLAN settings) of a
saved access profile (page 61).