2. Lift the board and slide it out at an angle to disengage the guide pins on the board.
3. Lift the board away for the system.
Installing power interposer board
l
Follow the safety guidelines listed in
Follow the below steps to install the Interposer Board:
1. Align the slots on the PIB with the guides on the system.
2. Using a Phillips #2 screwdriver, replace the two screws to secure the PIB to the system.
3. Route the cables and connect it to the system board.
After installing the Interposer Board you could do the following:
1. Install the PSU.
2. Install the air shroud.
3. Follow the procedure listed in
After working inside your system
.
Contents
80
GigaVUE-FM Hardware Appliance Guide for GFM-HW1-FM010
