Gigamon GFM-HW1-FM010 Скачать руководство пользователя

Страница: 20 / 103

Front Bezel (Optional)

This describes the procedure to install and remove the optional Front Bezel.

Removing the front bezel

The procedure to remove the front bezel with and without the LCD panel is the same.

Follow the safety guidelines listed in

Safety instructions.

1. Unlock the bezel by using the bezel key.

2. Press the release button, and pull the left end of the bezel.

3. Unhook the right end, and remove the bezel.

Installing the front bezel

The procedure to install the front bezel with and without the LCD panel is the same.

Follow the safety guidelines listed in

Safety instructions

1. Locate and remove the bezel key.

OTE

The bezel key is part of the LCD bezel package.

2. Align and insert the tabs on the bezel into the slots on the system.

3. Press the bezel until the button clicks in place.

4. Lock the bezel by using the key.

System cover

This describes the procedure to install and remove the System Cover.

Removing the system cover

Follow the safety guidelines listed in

Safety instructions

Turn off the system, including any attached peripherals.

Disconnect the system from the electrical outlet and disconnect the peripherals.

Contents

GigaVUE-FM Hardware Appliance Guide for GFM-HW1-FM010

Содержание GFM-HW1-FM010








































































































Результаты поиска

Содержание GFM-HW1-FM010

Отзывы:

Похожие инструкции для GFM-HW1-FM010

Бренды по названию

Популярные бренды

Gigamon GFM-HW1-FM010, Руководство по эксплуатации прибора

Результаты поиска

Содержание GFM-HW1-FM010

Отзывы:

Похожие инструкции для GFM-HW1-FM010

Бренды по названию

Популярные бренды