Powering on the Appliance Manually
The following procedure is used to manually power on the appliance. You can also power
on the appliance through iDRAC.
1. Remove the front bezel.
2. Press the power button located in the upper-left corner of the front panel.
3. Replace the front bezel.
4. Log.
Logging in to the GigaVUE-FM application from the appliance
1. Power on the appliance. See
Powering on the Appliance Manually
. The appliance will
boot up and load the software. When it is completed, you will see the login screen for
GigaVUE-FM.
2. At the login prompt, enter admin.
3. When the system prompts for a password, enter admin123A!!
The system will automatically run the configuration jump-start script the first time you
log in.
Accessing the Appliance Remotely
You can manage the GigaVUE-FM appliance remotely through iDRAC. iDRAC is always
available where there is power to the system. This allows you to power on/off the host
and connect through the Integrated Remote Access Controller UI with a Web browser.
Before you can access the appliance remotely, you need the iDRAC IP address.
1. Locate the LCD display on the front panel.
2. Click the Select button.
3. When you see the Home icon, click the Right button to select the View menu.
4. Click the Select button to choose the iDRAC menu.
5. Click the Select button to choose IPv4.
6. Record the IPv4 address.
Powering on the Appliance through iDRAC
The following is the procedure for powering on the appliance through the iDRAC
connect. This allows you to power on/off the device remotely.
1. Log in to the iDRAC interface.
Contents
12
GigaVUE-FM Hardware Appliance Guide for GFM-HW1-FM010
