Gigamedia System Configuration Manual
Page 9 , Total 43
Router Mode and WISP Mode.
A brief introduction to those modes:
1.
Bridge Mode:
bridge Mode is typical 2-layer network mode. The unit ETH port and
wireless
interface
are working at layer-2 network mode, no independent IP address. For the whole unit
only has one Bridge port IP address.
2.
SOHO Router Mode:
this mode is typical network mode of wireless router.
The ETH port is
worked as WAN interface, connecting another network by ETH port, such as Internet or
enterprise network. This device connects with public network supporting three ways: static IP
address, DHCP dynamic IP address and PPPoE.
Only when the unit works as
AP Mode
and
AP WDS Mode
, network mode can be set as
SOHO
Router Mode
.
3.
WISP Mode:
this mode is opposite to SOHO Router. It uses wireless interface as WAN to
connect public network and ETH port as 2-layer access port. For this mode we can think the
unit as a wireless client router supporting PPPoE over air.
Only when the unit works as Station Mode or Station WDS Mode
，
network mode can be set as WISP
Mode.
Network Settings
Bridge IP Address:
IP address of Bridge interface
.
Net mask:
net
mask
of bridge interface IP address
.
Bridge Mac
：
MAC address of bridge interface
.
Gateway
：
gateway IP Address
of bridge interface
.
Primary DNS IP
：
primary DNS address of bridge interface
.
Secondary DNS IP
：
secondary DNS address of bridge interface
.
