Gigamedia System Configuration Manual
Page 7 , Total 43
Radio mode:
working mode of Radio, supporting 802.11a/an two kinds of working modes.
Channel/Frequency:
radio current working channel and working frequency.
Channel Width:
radio channel bandwidth
，
supporting 20MHz and 40MHz. Channel
bandwidth has great influence to the wireless. Under no interference environment, average
throughput of 40MHz channel bandwidth can reach more than twice of 20MHz channel
bandwidth.
Country Code:
country code of current working Radio. Different country code has different
channel and power for Radio supporting.
Tx Power:
current Radio transmission power. Transmission power influences directly signal
strength of communication system, so we should guarantee transmission power big enough;
Max Rate:
max sending rate of Radio supporting. Different channel bandwidth could affect max
sending rate. If AP and Station can reach to 40MHz channel bandwidth, max sending rate can
reach to 300Mbps, and throughout rate can improve more than twice.
WiD TDMA:
the status of WiD TDMA with ‘enable’ or ‘disable’.
Station
status box shows the unit working as Station Mode.
Figure 2-3 Wireless Station Status
Up/Down:
UP means CPE has successfully connected with AP. Down means the link is not
built.
SSID:
SSID name of AP that CPE is connecting
.
BSSID:
BSSID address of AP that CPE is connecting.
Signal Strength:
signal strength of AP that CPE is connecting
.
Signal strength is negative, the
smaller the absolute value of signal strength, the stronger it proves between CPE and AP.
When it transmits in long distance, stronger signal can ensure higher thorough for wireless
transmission.
Security:
security way of AP that CPE is connecting, CPE supporting None/WEP/WPA-
