Gigamedia System Configuration Manual
Page 32 , Total 43
2.5.2 Telnet Server
Telnet Server is used to set enable Telnet server and server port.
Figure 2-43 Telnet Server
Enable Telnet Server:
working “enable” or “to enable” Telnet server, the default is “to
enable”state
.
Server Port:
set server port of telnet server, the default is 23.
2.5.3 NTP Client
NTP means Network Time Protocol. NTP can make time of all devices stay the same.
Figure 2-44 NTP Client
NTP Client:
set NTP Client service of“enable” or “disabled”, the default is disabled.
NTP Server:
set IP address or domain name of NTP Server.
2.5.4 System Log
Figure 2-45 System Log
System Log:
set system log service of“enable” or “disabled”, the default is disabled.
Remote Log:
set remote log service of“enable” or “disabled”.
Remote Log IP Address:
set remote log receiving host IP address.
Remote Log IP Port:
set remote log receiving host port.
