Gigamedia System Configuration Manual
Page 13 , Total 43
Tx/Rx Bytes:
send-receive bytes between AP and STA. Tx means sending bytes from AP to
STA, Rx means receiving bytes from STA to AP
.
Tx/Rx Rate:
rate using by send-receive packets between AP and STA. Tx means senidng rate
from AP to STA, Rx means receving rate from STA to AP, in fact it is sending rate of STA.
2.1.8 Monitor-AP Stats
When the unit works as Station Mode, the list shows info of CPE connecting AP, as Figure 2-12
Figure 2-12 Monitor-AP Stats
SSID:
SSID name of AP that CPE is connecting
.
BSSID:
BSSID address of AP that CPE is connecting
.
Mode
：
radio work mode of AP that CPE is connecting
.
Channel:
work channel of AP that CPE is connecting
.
Signal:
CPE detected AP RSSI
.
Assoc Time
：
duration online after CPE is connecting AP
.
Tx/Rx Packets
：
send-receive packets between CPE and AP. Tx means sending packets from
CPE to AP, Rx means receiving packets from AP to CPE
.
Tx/Rx Bytes:
send-receive bytes between CPE and AP. Tx means sending bytes from CPE to
AP, Rx means receiving bytes from AP to CPE
.
Tx/Rx Rate:
rate using by send-receive packets between CPE and AP. Tx means senidng rate
from CPE to AP, Rx means receving rate from AP to CPE, in fact it is sending rate of AP.
2.1.9 Monitor-Routes
Routes list shows current routing relationship of device, as Figure 2-13.
