Gigamedia System Configuration Manual
Page 24 , Total 43
1. Wireless Settings
SSID:
when the unit is set as Station Mode, enter here SSID of linked AP. If just enter SSID not
AP MAC address, it will choose the strongest signal among the same SSID to connect to.
Lock to AP MAC:
lock MAC address needing to link AP. After SSID and AP MAC both enter,
it will connect to the AP which meet two condition, not only same SSID.
Scan:
scan button is used for scanning SSID with available channels.
MAC Address:
BSSID address of wireless service
.
SSID:
BSSID name of wireless service, also called ESSID.
Auth_mode:
authentication method of the wireless service.
Encryption:
encryption types of the wireless service .
Signal/Noise:
signal strength and noise floor of wireless service.
Frequency
：
working frequency of the wireless service
.
Channel:
working channel of the wireless service
.
Lock to AP:
if click this button, the unit would lock the BSSID of this wireless service.
2. Wireless Security
The unit would automatically choose the right encryption type, and you need to input the encryption
key in this textbox.
2.4 NETWORK
NETWORK Page is used for setting relevant parameters of network mode. The unit supports
Bridge
Mode
,
SOHO Router Mode
and
WISP Mode
.
SOHO Router Mode
and
WISP Mode
is the same for settings page, here is introduction about
Bridge
Mode
and
WISP Mode
.
2.4.1 Bridge Mode
Setting of Bridge Mode is shown as Figure 2-32.
