Gigamedia System Configuration Manual
Page 28 , Total 43
Figure 2-36 Setting Page
1.
Network Role
Network Mode :
set current network mode.
2.
WAN Network Settings
WAN IP Address:
WAN IP adsress obtaining way, separately static set, DHCP access and
PPPoE negoiation. Because static set and DHCP access are the same with setting of Bridge
Mode, there is directly introduction PPPoE
.
Username:
set PPPoE connection username
.
Password
：
set PPPoE connection password
.
Service Name:
set PPPoE connection service name
.
Fallback IP:
set fallback IP address after PPPoE negoiation failed
.
Fallback Netmask:
set fallback netmask of IP address after PPPoE negoiation failed
.
MTU/MRU:
set MTU and MRU PPPoE negoiation
.
Encryption:
set MPPE Agreement when“enable” or “to enable” PPPoE negoiation is using
（
Microsoft Point-to-Point Encryption Agreement
）.
NAT
：
set NAT service of “enable” or “disabled” with the checkbox
.
DMZ
: set DMZ service of “enable” or “disabled”
NAT Protocol
：
for some NAT service of special agreement, it needs to enable alone, CPE
supporting NAT service of SIP
、
RSTP
、
FTP and PPTP.
