Gicam WIN9, Руководство пользователя

Страница: 17 / 40

Pagina – page – Seite 15
Data setting
Restore zero (semi-automatic zero)
This operation is performed to correct small zero movements of the scale. To carry out the zeroing function,
it is necessary to switch the display to the gross weight indication (NET LED off).
The gross weight reset command is not performed in the following conditions:
 Weight instable (the weight does not stabilize within 3 seconds from the reset command)
 Gross weight, compared to the original zero calibration, greater (positive or negative) than the value
of the parameter entered in divisions (from 0 to 200) in the menu item
0 bAnd
from the
PArAM
menu
(if this parameter is 0, the function is disabled).
Input / Output
Input
1 Start dosing
2 Stop dosing
1 Quick dosing
2 Slow dosing
Output
123456
Confirm value
Select next digit
Increase digit
Decrease digit

Restores zero scale on gross weight