Giant UGTC-152N, Инструкция по установке и эксплуатации

Страница: 8 / 46

8 UGTC Series Manual
Additional clearances
Check on whether local codes supersede these
clearances.

Avoid termination locations near a dryer vent.

Avoid termination locations near commercial
cooking exhaust.

You must install a vent termination at least 12
inches from the ground.
(0.30 m) between
terminals at same
level
(1.52 m)
vertically
between
terminals
60"
V
V
(1.52 m)
between
terminals at
different levels
24"
V
(0.61 m) to wall or parapet
12"
V V
V
60"
V
12"
12"
36"
INSIDE
CORNER
V V
(0.30 m) between
terminals at same
level
(0.30 m ) to
an inside
corner
The vent for this appliance shall not terminate

Over public walkways; or

Near soffit vents or crawl space vents or other
area where condensate or vapor could create a
nuisance or hazard or cause property damage; or

Where condensate or vapor could cause damage
or could be detrimental to the operation of
regulators, relief valves, or other equipment.
Important considerations for locating vent
termination under a soffit (ventilated or unventilated
or eave vent; or to a deck or porch)

Do not install vent termination under a soffit vent
such that exhaust can enter the soffit vent

Install vent termination such that exhaust and
rising moisture will not collect under
eaves. Discoloration to the exterior of the
building could occur if installed too close.

Do not install the vent termination too close
under the soffit where it could present
recirculation of exhaust gases back into the
combustion air intake part of the termination.