Ghost Bike Скачать руководство пользователя

Страница: 125 / 132

GHOST

User Manual Status 04/2009 // Spec 2010

11.125

Exceptions:

•

Brake blocks or brake pads

•

Wheel rims with rim brakes

•

Brake discs

•

Handles, brake/gear levers

•

Saddle

•

Tyres

Polish your bike after the prescribed waiting time with a clean, lint-free cotton
cloth.

Clean the brake blocks, brake pads, wheel rims (with rim brakes) and brake
discs by hand using a clean, dry, lint-free cotton cloth and suitable degreasing
agent.

Clean and lubricate the chain as described above after

Every use in the wet

Every prolonged ride on sandy ground

Every 200 km at the latest

Danger of personal injury and material damage!

Worn parts and unrepaired bike damage can lead to dangerous riding
situations, falls, accidents and material damage.

Clean and service your bike at regular intervals.

Take your bike to an approved workshop at the prescribed maintenance
intervals.

Only in this way can worn parts and possible damage be discovered and
repaired.

Danger of personal injury and material damage!

Children and youths often place a greater strain on their bikes than adults.

Take such children’s and youths’ bikes to an approved workshop every
6 months for inspection.

If you discover any damage to your children’s and youths’ bike, take it
to an approved workshop for inspection immediately.

Service plan:

Have the service work carried out at the prescribed intervals only in an approved
workshop authorised by the manufacturer.

Содержание Bike





































































































































Результаты поиска

Содержание Bike

Отзывы:

Похожие инструкции для Bike

Бренды по названию

Популярные бренды

Ghost Bike, Руководство пользователя

Результаты поиска

Содержание Bike

Отзывы:

Похожие инструкции для Bike

Бренды по названию

Популярные бренды