Ghost Bike Скачать руководство пользователя страница 31

Страница: 31 / 132

GHOST

User Manual Status 04/2009 // Spec 2010

6.31

Before Every Use

Danger of personal injury and material damage!

A bike that is not completely ready for use can lead to dangerous riding
situations, falls, accidents and material damage.

Also consider the possibility that your bike may have fallen over or been
manipulated by unknown persons while unsupervised.

Check that your bike is safe for use before every journey.

Memorise the correct condition of your bike when new so that you can
later more easily recognise any deviations from the correct condition
(taking photographs can be a valuable aid here).

Contact your dealer immediately if you discover that your bike is not in
the proper condition.

Ride your bike again only when it has been properly repaired by your
dealer.

The parts described below are not installed on all bikes. Some parts can also
be installed later.

Check in chapter 4 and with the aid of the following illustrations which
equipment your bike has. Carry out the corresponding checks.

If you are not sure about anything or have any questions, please contact your
dealer.

Carry out a visual inspection of the whole bike.

•

Check all mounting screws / bolts for proper tightness (see chapter 1.2.4).

•

Inspect the whole bike for dents, cracks, deep scratches or other
mechanical damage.

Contact your dealer if the visual inspection reveals faults of any kind.

6.1

Inspect the wheels

Inspect the front and rear wheels.

A wheel consists of

•

Hub

•

Only on the rear wheel hub: Sprocket or sprocket assembly

Содержание Bike





































































































































Результаты поиска

Содержание Bike

Отзывы:

Бренды по названию

Популярные бренды

Ghost Bike, Руководство пользователя

Результаты поиска

Содержание Bike

Отзывы:

Бренды по названию

Популярные бренды