Ghost Bike Скачать руководство пользователя

Страница: 32 / 132

GHOST

User Manual Status 04/2009 // Spec 2010

6.32

•

Brake disc, if installed

•

Spokes / nipple

•

Rim and

•

Tyre, which in turn consists of

–

Tyre,

–

Inner tube and

–

Rim tape

Some bikes are equipped with tubeless wheels. In this case tyres without inner tubes are fitted to
special rims. An inner tube can, however, also be installed.

On bikes with StVZO approval, rim reflectors may also be installed.

6.1.1

Check the installation

Shake both wheels strongly at right angles to the running direction.

•

The wheels must not move in their mounting.

•

The quick-release lever must be closed (see chapter 7.9).

•

No cracking or grinding noises should be heard.

Contact your dealer if the inspection reveals faults of any kind.

6.1.2

Check the wheel rims

Danger of personal injury and material damage!

Worn rims and/or extreme wobble can lead to dangerous riding situations, falls,
accidents and material damage.

Worn rims must be replaced, wobble repaired!

Danger of personal injury and material damage!

With rim brakes: Soiled rims can impair the braking effect.

Soiled rims must be cleaned immediately (see chapter 11).

Содержание Bike





































































































































Результаты поиска

Содержание Bike

Отзывы:

Похожие инструкции для Bike

Бренды по названию

Популярные бренды

Ghost Bike, Руководство пользователя

Результаты поиска

Содержание Bike

Отзывы:

Похожие инструкции для Bike

Бренды по названию

Популярные бренды