Ghost Bike Скачать руководство пользователя страница 106

Страница: 106 / 132

GHOST

User Manual Status 04/2009 // Spec 2010

10.106

Ensure that the brake blocks contact the rim flank correctly when the brakes are
actuated.

On the front wheel with hub dynamo (if installed):

•

Reconnect the plug connector between hub dynamo and wiring.

Check the installation:

•

Actuate the brakes.

•

If a brake block or brake pad continues to be in contact with the wheel rim or
brake discs, this can indicate incorrect mounting of the hub in the fork ends.

•

In this case release the quick-release lever again, check and correct the
position of the hub and close the quick-release lever again.

•

The brake (with rim brakes) does not have to be opened for this. If this does
not improve the situation, contact your dealer immediately.

•

Ensure that the lighting system (if installed) is functioning correctly.

•

Ensure that the wheels do not touch either the mudguards or luggage rack
(if installed).

Содержание Bike





































































































































Результаты поиска

Содержание Bike

Отзывы:

Бренды по названию

Популярные бренды

Ghost Bike, Руководство пользователя

Результаты поиска

Содержание Bike

Отзывы:

Бренды по названию

Популярные бренды