Ghost Bike Скачать руководство пользователя страница 7

Страница: 7 / 132

GHOST

User Manual Status 04/2009 // Spec 2010

1.7

Danger of personal injury and material damage!

This user manual is not intended to teach you how to ride a bike.

This user manual is not intended to teach you riding techniques.

1.1.2 Referenced

documents

•

Component user manuals

Danger of personal injury and material damage!

Due to the wide variety of existing bike components, it is not possible to
produce a generally applicable user manual.

Therefore always observe also the information in the component user
manuals supplied with the bike.

This information takes priority in all cases over deviating information in
the following text.

1.2 Conventions

1.2.1 Symbols

Note!

Draws attention to information of particular importance.

Warning!

Draws attention to the possibility of minor personal injuries and possible
material damage.

Danger!

Draws attention to the possibility of serious personal injury or even death.

Содержание Bike





































































































































Результаты поиска

Содержание Bike

Отзывы:

Бренды по названию

Популярные бренды

Ghost Bike, Руководство пользователя

Результаты поиска

Содержание Bike

Отзывы:

Бренды по названию

Популярные бренды