GHM Delta OHM HD50CR, Руководство по эксплуатации, Страница: 39 / 54

HD50CR
- 39 -
V1.0
Address Type Input Register description
General information
10000 W Year of last measurement.
10001 W Month of last measurement.
10002 W Day of last measurement.
10003 W Hour of last measurement.
10004 W Minutes of last measurement.
10005 W Seconds of last measurement.
10010 W Time, in seconds, elapsed since the last transmitted packet.
10011 W RF signal level.
10013 W
Password level for the current connection:
0=no password, 1=user level, 2= administrator level
Holding Registers - Read/Write parameters
Address Type Holding Register description
Measurement alarm thresholds
2 SW RH lower alarm threshold in % (x10).
3 SW RH higher alarm threshold in % (x10).
4 SW D
EW POINT
lower alarm threshold in the set measurement unit (x10).
5 SW Dew point higher alarm threshold in the set measurement unit (x10).
10 SW A
BSOLUTE HUMIDITY
lower alarm threshold in g/m 3 (x10).
11 SW Absolute humidity higher alarm threshold in g/m 3 (x10).
12 SW W
ET BULB TEMPERATURE
lower alarm threshold in the set measurement unit
(x10).
13 SW Wet bulb temperature higher alarm threshold in the set measurement unit
(x10).
84 SW D
IFFERENTIAL PRESSURE
lower alarm threshold in the set measurement
unit (the multiplier depends on the set unit).
85 SW Differential pressure higher alarm threshold in the set measurement unit
(the multiplier depends on the set unit).
174 SW Lower alarm threshold for
TEMPERATURE
with 4-wire Pt100 sensor of the
T/RH combined probe in the set measurement unit (x100).
175 SW Higher alarm threshold for temperature with 4-wire Pt100 sensor of the
T/RH combined probe in the set measurement unit (x100).
General information
da 10000
a 10019
B
User code with ASCII codification.
Acceptable values are in the set {32,…,126}.
10020 W Current year
10021 W Current month
10022 W Current day
10023 W Current hour
10024 W Current minute
10025 W Current second
10026 W
Measurement interval: 0=1s, 1=2s, 2=5s, 3=10s, 4=15s, 5=30s, 6=1min,
7=2min, 8=5min, 9=10min, 10=15min, 11=30min, 12=1h
10027 W
Logging interval: 0=1s, 1=2s, 2=5s, 3=10s, 4=15s, 5=30s, 6=1min, 7=2min,
8=5min, 9=10min, 10=15min, 11=30min, 12=1h
10032 W
Temperature measurement unit: 0=°C, 1=°F
10034 W Baud rate RS485: 0=9600, 1=19200, 3=38400 bit/s