GHL ION Director Скачать руководство пользователя страница 9

Страница: 9 / 34

Instruction Manual

ION Director®

2021-01-23

•

Power supply splitter-cable

•

IOND MUI Sensor

•

Reference solutions A and B

•

Flex PVC tube

8 m (315”)

•

Inline water-filter

•

Insert

PAB

connection cables are not included with the

ION Director®

, they are also available in our

onlineshops. The

IOND-Sets

do however, include a

PAB-Cable

for connecting the

IOND

to the

included Doser.

Please check to make sure all items are in perfect condition. In case of damage, immediately
contact the dealer from whom you purchased the

ION Director®

WARNING

A damaged

ION Director®

or components may not be put into operation

under any circumstances.

Connections of the ION Director®

3.1

General

Applies to all connections:

WARNING

•

Connect only original accessories from GHL.

•

Do not use force when plugging-in connectors. If a plug contact does
not fit check that you have chosen the correct socket and that the
orientation is correct.

DANGER

•

Incorrect connection (For example inserting a USB connector into a

PAB

connector) can lead to damaging the

ION Director®.

•

A repair caused by this, is not covered under warranty and will
therefore incur repair charges

Содержание ION Director



































Результаты поиска

Содержание ION Director

Отзывы:

GHL ION Director, Инструкция по эксплуатации, Страница: 9 / 34

Результаты поиска

Содержание ION Director

Отзывы: