GHL ION Director Скачать руководство пользователя страница 16 | Manualshive

Страница: 16 / 34

GHL ION Director Скачать руководство пользователя страница 16

Instruction Manual

ION Director®

EN

2021-01-23

16

The

ION Director®

as well as its accessories are destroyed by excess moisture or excess

atmospheric humidity - Please observe the technical data and notes below!

To ensure maximum safety and operation, the following regulations must be followed! Failure
to follow the safety guidelines will result in VOIDING your warranty. The manufacturer rejects
any responsibility or liability for damages resulting from misuse!

Powered equipment and water can become a dangerous combination if precautions are not
taken. It is therefore essential to supply power to all mains-operated devices which are
operated in the aquarium or in the vicinity of the device via a residual current circuit breaker!

In order to avoid any danger, all mains-operated devices must be disconnected from the
mains; all plugs must be disconnected! When working in the aquarium, it can never be ruled
out that a heating element, a pump, or a luminaire is defective.

Please also note:

TIP

•

Please ensure good access to the connections of the device

•

Please consider the maximum cable lengths of the connected

PAB

cables, sensors etc. when selecting the installation site

WARNING

•

To ensure proper operation, the connection cables should never be
kinked, crimped, or positioned in an unsuitable way.

DANGER

•

The

ION Director®

must

be installed horizontally.

•

The maximum deviation from the horizontal must not exceed
+/- 3 °.

•

Only when installed correctly

an adequate measurement can be

carried out.

•

The ION Director® may NEVER be used without a built-in MUI
sensor!

«
...
14
15
16
17
18
...
»

Содержание ION Director



































Отзывы:

Нет отзывов