GHL ION Director Скачать руководство пользователя страница 6 | Manualshive

Страница: 6 / 34

GHL ION Director Скачать руководство пользователя страница 6

Instruction Manual

ION Director®

EN

2021-01-23

6

1.1

Safety of Children and Vulnerable Persons

WARNING

This equipment must not be used:

•

By small children and vulnerable persons with limited physical,
sensory or mental capabilities.

•

By people who are unfamiliar with the functions of this product.

1.2

Intended Use

The

ION Director®

is intended exclusively for use in the domestic area.

ION Director®

may only

be operated with GHL accessories.

The

ION Director®

may only be used to determine the respective ion concentrations of

aquarium water.

Make sure to place the device away from splashing water, moisture or other liquids.

WARNING

To ensure safe operation, the following guidelines must be followed.
Disregarding these safety guidelines, will result in voiding your warranty.
In which case, the manufacturer rejects any responsibility or liability for
damage!

WARNING

Moisture indicators are placed inside the unit and will change color when
exposed to excessive moisture.
Removing these indicators will void all warranty claims

DANGER

Warning that non-compliance can result in injury or damage to the device.

«
...
4
5
6
7
8
...
»

Содержание ION Director



































Отзывы:

Нет отзывов