GGM gastro SIRIO 500, Руководство по установке, использованию и обслуживанию

Страница: 18 / 70

4. INSTALLATION
SIRIO 500 BANCO - 500 - 600 18
SIRIO 600:
To bring a bench ref. 1 (Fig. 4.6) from the position shown in photo A to the
position shown in photo E:
- remove any rolling pins present and lower their supports.
-
check that the crumb shelf is inserted and secured and that the dough
catcher is pushed in.
-
completely raise the guard ref. 4.
-
lift the bench ref. 1 (photo B):

for
bench
length ≤ 850 mm: while the operator holds the bench up with
one hand, he should use the other hand to bring the crossbar of the
support ref. 5 to rest on the blocks ref. 3 (photos C - D - E)

for
bench
length > 850 mm: while one operator holds the bench up
with both hands, the second operator should bring the crossbar of
the support ref. 5 to rest on the blocks ref. 3.
To bring the bench ref. 1 from the position shown in photo E, to the
position shown in photo A, following the precautions indicated above
according to the length of the bench, push it forwards slightly, release the
support ref. 5 from the blocks ref. 3, accompany the bench downwards
making sure that the bar ref. 5 rests on the lower blocks ref. 2.
In both conditions the bar ref. 5 of the support arm must rest
securely on the blocks ref. 2 or ref. 3 to avoid the risk of the bench
accidentally falling.
NB
Please note that the arrangement shown in photo E is only possible for
benches up to 1400 mm long; longer benches can only rest in the working
position shown in photo A.