GGM gastro SIRIO 500, Руководство по установке, использованию и обслуживанию

Страница: 13 / 70

4. INSTALLATION
SIRIO 500 BANCO - 500 - 600 13
2
4.4.1. Assembling a bench (only for SIRIO 600)
With reference to Fig. 4.2, completely raise the guard ref. 6 (see also par.
4.5) from the side of the bench to be assembled (photo A) and remove the
scraper ref. 7 (par. 7.3 and par. 7.3.2).
Operators must keep the bench horizontal by holding it at points far
enough away to be able to support it easily. While operator X holds the
bench ref. 1, the operator (expert) Y, always supporting the bench, ensures
that the end of the cylinder ref. 3 fits onto the round tab ref. 2, protruding
from the shoulder; he must then push the bench in the direction shown by
the arrow F1, so as to compress the spring (not visible in the figure) that
keeps the round tab ref. 2 pushed in and immediately afterwards (almost at
the same time) move it in the direction shown by the arrow F2, so as to fit
the round tab ref. 5 in the other end of the cylinder ref. 4. Place the bench
in a horizontal position on its support arm, then fit and secure the scraper
ref. 7 (see par. 7.3 and par. 7.3.2).
Fig. 4.2
X
3
1
Y
F1
F2
4
5
6 A B
7