GGM gastro SIRIO 500, Руководство по установке, использованию и обслуживанию

Страница: 11 / 70

4. INSTALLATION
SIRIO 500 BANCO - 500 - 600 11
All responsibility for the lifting of loads rests with the person doing the
lifting.
Take care that children do not play with the packaging materials
(e.g., plastic sheeting and Styrofoam): suffocation danger!
In all circumstances, to avoid unpredictable movement, be aware of
the equipment’s centre of mass.
Once the packaging has been removed, in order to lift the machine by itself
(e.g. to move it from the pallet and place it on the ground), insert the forklift
arms on the opposite side from the controls, inside the support points of
the base and as close as possible to them (wheels for 500 and 600, feet
for 500 BANCO); the arms must protrude at least 200 mm from the
opposite side.
The model 600 machines are shipped with the benches dismantled and
packed with the machine body; the cutting unit (optional) is also included in
the same packaging, if ordered. For the assembly of the benches see
paragraph 4.4.
Model 500 BANCO - 500 machines are shipped with benches
assembled and all raised.
Accessories and options are usually packed with the machine.
When moving the machine on the wheels the benches must be
in the lowered position and, if necessary, must be raised (for example
to save space) only at the last moment.
Moving the machine on the wheels with the benches lifted, can
involve a risk of tipping and falling over (e.g. if the machine bumps
against obstacles on the ground or a wheel hits a hole in the floor),
with the consequent risk of hitting people nearby and injuring them
.
Before using the machine, lock the wheels (if present) with the
brake levers.