2.
If necessary, loosen the bolts (1/2-inch hex bolt head) securing the gas train access panel, and lift
panel out of place.
3.
The filter access panel is located within the chamber. Remove the six bolts (1/2-inch hex bolt heads) to
gain access.
4.
Using both hands, pull the used filter by its frame along the track and out of the unit.
Remove the remaining filters in the same manner as the first filter.
WARNING
Treat used filters and any other paint-contaminated items as flammable products and dispose of them
safely.
NOTE
Pay attention to the orientation of the filter inside the unit.
Service and maintenance
Global Finishing Solutions
23
239-062 rev 5
