+GF+ SG 160, Инструкция по эксплуатации

Страница: 36 / 60

8 Fusion Operating instructions SG 160
32
The pipe end has to be machined until the cross-sectional area of the pipe
contacts the base plate of the peeling tool.
Stop the motor without removing the pipe.
Open the clamping jaws slightly, move the carriage to the right until the
clamping jaws come in contact with the peeling tool. Tighten the clamping jaws
again. The present position of the pipe is essential for the exact insert depth
during the following fusion process.
Secure the planer in position by adding some force and lock the position.
Attention