6
Signet 5500 Flow Monitor
Menu Settings A - N:
(Factory default displays shown)
A. Sets
fl
ow units label (gpm) and timebase
(gpm).
Flow units label: Aa - Zz, 0 - 9, /
Timebase options: h=hours, m=minutes,
s=seconds, d=days (timebase entry affects
fl
ow rate display and 4 to 20 mA output)
B. Sets
Min
→
Max meter and dial range, 00.000
to 99999. (Does not affect 4 to 20 mA output)
C.
Sets
fl
ow K-Factor: 0.0001 to 99999. (See
technical notes below)
D. Sets 8-digit totalizer units label: Aa - Zz,
0 - 9, / (Does not affect totalizer display or
outputs)
E. Sets totalizer K-Factor: 0.0001 to 99999.
(See technical notes below)
Menu items F - I repeat for relay 2 setup.
F. Sets relay operation mode Low or High, and
fl
ow rate setpoint, 0.0000 - 99999. (sec. 8.5)
G. Sets relay hysteresis, 0.0000 - 99999.
(sec. 8.5) (Set to zero to disable hysteresis
feature)
H. Sets relay pulse volume setpoint, 0.0001 -
99999. (sec. 8.5). Set to 1.0000 to enable
totalizer function (sec. 8.5).
I.
Sets relay pulse width, 0.10 - 999. seconds
(sec. 8.5)
J. Sets auxiliary output mode Low or High, and
fl
ow rate setpoint, 0.0000 - 99999. (sec. 8.2).
K. Sets auxiliary output hysteresis, 0.0000 -
99999. (Set to zero to disable hysteresis
feature)
L. Sets auxiliary output pulse volume setpoint,
0.0001 - 99999. (sec. 8.2). Set to 1.0000
(factory default) to enable totalizer function
(sec. 8.2).
M. Sets auxiliary output pulse width, 0.10 - 999.
seconds
N. Sets user de
fi
ned setup date for
maintenance records. This feature is not an
internal timer or calendar.
Technical Notes:
The
fl
ow and total K-Factors are independent
of each other. The K-Factor settings represent
the number of pulses generated by the Signet
fl
ow sensor for each engineering unit of
fl
uid
measured (published in
fl
ow sensor manual).
K-Factor
Flow K-Factor
Last calibration
quick
press
To return to
VIEW menu:
quick
press
To restore original value:
Flow units
Unit + timebase: h,m,s,d
Flow range
Setup date
Meter Min→Max
- Display label only -
K-Factor
Total units
Total K-Factor
Mode & setpoint
Press
will appear during code entry.
keys in sequence to enter menu,
Mode & setpoint
Relay
Mode & setpoint
Aux output
Mode & setpoint
Aux output
Pulse width
Aux output
Hysteresis
Aux output
Relay
Hysteresis setting
Relay
ENTER
Relay Low or High Mode Selected
Aux Output Low or High Mode Selected
Aux Output Pulse mode selected, step J
Relay Pulse Mode Selected, step F
A.
B.
C.
D.
E.
F.
G.
H.
Pulse width
Relay
I.
J.
K.
L.
M.
N.
"SAVING"
briefly
displays
1
2
3
Choose:
Change:
Save:
N↓
A↑
9.2 CALIBRATE
Menu
