GF JRG Coral force 11000, Руководство по эксплуатации

Страница: 7 / 68

Seite 7 von 68 Rev.: 1113803-1
1.4 Safety Information and Prerequisites for Installation
Attention
• Use the device only in its proper working condition and for its intended use and in
full awareness of safety issues and potential hazards.
•
Observe the installation and operating instructions.
•
Ensure that any faults that may affect safety are rectified immediately by a
specialist.
•
Installations and repairs not performed by authorised professionals, technical
modifications to the device not approved in writing by the manufacturer and/or
the use of non-original spare parts will void the warranty and the product liability
of the manufacturer.
•
U
Intended Use of the JRG Coral force Series:
o
Limescale protection in apartment buildings, hotels, schools and other
public buildings and in commerce and industry.
o
To be installed only in the cold-water supply line of the potable water
installation.
o
The applicable (local) installation regulations, general guidelines and
standards for the supply of potable water and heated potable water
(TrinkwV (German Drinking Water Ordinance), DIN2000, DIN2001,
DIN50930, DIN1988, DVGW, ÖVGW- or SVGW standards) must be
observed and complied with when used in potable water installations.
•
U
JRG Coral force units are not suitable for
U
:
o
Technical systems for which partially softened or demineralised water
is stipulated by the manufacturer (JRG Coral force units are not water
softeners),
o
Process water whose composition does not meet the requirements of
the Drinking Water Ordinance (TVO, Trinkwasserverordnung),
o
Water that is strongly undersaturated with respect to lime (aggressive
to lime) in the vicinity of the treatment unit,
•
The unit must be connected to a correctly installed, earthed and fused three-phase
power socket (400 V/50 Hz).
• Insert the power plug only after assembly is complete.
• Do not expose the system to direct moisture. In particular, ensure that no water
drips onto it from above.
• Check regularly that the system is watertight and correctly functioning and observe
the prescribed inspection and maintenance intervals and the measures provided
for this purpose accurately.
•
Before performing maintenance or repair work, ensure that access to the working
area of the limescale conditioner for unauthorised persons is blocked.