GF JRG Coral force 11000, Руководство по эксплуатации

Страница: 20 / 68

Seite 20 von 68 Rev.: 1113803-1
5 Technical Data
Hydraulic
Coral force
8000 11000 14000 3.5D 5D
Residential units max. up to VDI
3807-T3 *)
WE 30 68 114 160 230
Short-term peak flow rate, Qs [l/h] 7.900 10.100 11.800 12.500 13.500
Continuous flow rate [l/h] 650 1.500 2.500 3.500 5.000
Nominal pressure PN 10
Operating pressure (min. - max.) [bar] 2-8
Pressure loss at peak flow [bar] 0,3 0,17 0,4 0,3 0,3
Ambient temperature [°C] 40
Water temperature [°C] 30
Backflush flow rate (pressure-
dependent)
[l/min] 40 bei 6bar
Backflush flow volume [l] 100 190 260 382 432
Electric
Coral force
8000 11000 14000 3.5D 5D
Power consumption in treatment
mode
[W] 5
TDI power consumption [W] 2070 4570 4570 6070 6070
Mains supply 400V, 50HZ, 3P+N+PE
Plug type CEE 16A 400V 3P+N+PE
Max. ambient temperature °C 40
Protection class 1
Protection type IP 54
*) The maximum number of residential units (RU) specified in the table refers, under VDI 3807-T3, to an
average occupancy of 2.2 persons per RU and an average water consumption of 100 litres/person/day. While
these statistical average values must be considered during planning and design of limescale protection
systems, in practice significant variations may occur depending on the occupants' usage behaviour and actual
occupancy rates.
In principle the layout of JRG Coral force limescale conditioner systems should
comply with Georg Fischer JRG’s planning recommendations.
The relevant documents and planning information can be found in our planner
documentation.