TSA 160 NT and variants
16
Installation
6.1.3 Checking the door
X
Check the space available.
X
Open and close the door manually.
X
Position the door stop.
X
Check whether the door is in a good mechanical
state and can be moved easily.
X
Check whether the door moves easily and safely
into and out of the lock latch.
max. 115°
Opening angle depending on the type of installation
A stop buffer is imperative if a TSA 160 NT Invers / TSA 160 NT Z Invers is used.
A stop buffer is recommended if a TSA 160 NT / TSA 160 NT Z is used.
6.2 Fitting dimensions
X
Use the correct fitting template according to the type of installation.
X
Note the type of fastening: Direct fastening or with mounting plate.
X
Align the fitting template parallel to the top of the door.
X
Affix the template with adhesive tape in compliance with the specified installation type.
à
Help: see the type of door sketches on the template.
In the case of doors that do not close smoothly, cut or fold the template along the perforation.
6.2.1 Transom installation opposite hinge side with link arm (single leaf, pushing)
Direct attachment
44
50
625
48
335
27 +X
54
27
34
420
1
2
1
Dimensional reference = middle of hinge
2
Ø 20, concealed cable routing
