TSA 160 NT and variants
28
Installation
X
Pull the wire rope (1) tight and clamp tight with
the clamping screw (10).
The trip rocker (8) must continue to lie against
the cam plate (6).
1
10
6
8
Installation on the active leaf drive
X
Adjust the adjusting nut (15) so that the marking
arrow (11) exactly covers the marking notch (13)
at the IS valve (12).
X
Then lock with the lock nut (14).
11 12
13
X
Install the link arm or roller guide rail onto the
active leaf, see Section 8.5.1 or 8.5.2.
X
Check the IS function: Open both leaves manu-
ally and then release.
à
The passive leaf has to close and the active
leaf does not begin to close until shortly
before the passive leaf closing position (max.
30° open position).
à
The closing start can be changed by adjusting
the cam plate (6) on the passive leaf drive.
à
Screw the clamping screws (5) of the cam
plate (6) tight.
