GEZE MBZ300, Руководство по установке, Страница: 3 / 48

MBZ300
3
Safety instructions
Symbols and illustrations
Warning notices
Warning notices are used in these instructions to warn you of property damage and personal injury.
X
Always read and observe these warning notices.
X
Observe all measures marked with the warning symbol and warning word .
Warning
symbol
Warning word Meaning
DANGER
Danger to persons.
Non-compliance will result in death or serious injuries.
WARNING
Danger to persons.
Non-compliance can result in death or serious injuries.
CAUTION
Danger to persons.
Non-compliance can result in minor injuries.
Further symbols and illustrations
Important information and technical notes are highlighted to explain correct operation.
Symbol Meaning
means “important information”;
Information on avoiding material damage, understanding a concept or optimising the operation
sequences
means “additional Information”
X
Symbol for an action: This means you have to do something.
X
If there are several actions to be taken, keep to the given order.
Product liability
In compliance with the liability of the manufacturer for his products as defined in the German “Product Liabil-
ity Act”, compliance with the information contained in this brochure (product information and intended use,
misuse, product performance, product maintenance, obligations to provide information and instructions) must
be ensured. Failure to comply releases the manufacturer from his statutory liability. GEZE makes no guarantee for
combinations with third-party devices.
1 Safety instructions
1.1 General information
The details in these instructions always refer to the factory provided standard configuration. Changes to the
software configuration of the control panel can only be made by trained GEZE specialised personnel. No
warranty claims may be made against the manufacturer or distributor of the control panel for damage that is due
to interventions in the control panel which are not authorised by the manufacturer or its distributor.
The details in these instructions must be observed when connecting components. Planning and calculation of
the power network is to be done by an installer and has to be carried out in accordance with the statutory regula-
tions (in Germany for example in accordance with MLAR).
X
Before the system is released for operation, an insulation measurement of the system's line network must be
performed and logged.
X
Contact GEZE if support is needed for planning and system set-up.
These instructions must be followed to ensure personal safety.
X
Immediately resolve any system malfunctions.
X
Always keep the installation instructions on hand near the control panel (e.g. in a plastic envelope directly on
the front door of the emergency power control unit).