Gewiss Chorus GW 10 764, Руководство по программированию

Страница: 35 / 36

USER INSTRUCTIONS
E
N
G
L
I
S
H
35
F.A.Q.
What does the temperature value on the display actually represent?
If no external temperature probe is enabled during programming, the value on the display
corresponds to the temperature detected by the sensor built into the timed thermostat.
If, however, an external temperature probe (of the Easy or NTC type) has been enabled, the
timed thermostat shows the average between the values detected by the probe and the
sensor, using a variable weight between 10% and 100% (which can be defined via the Easy
configurator).
Is it possible to view the temperature of an external Easy probe (e.g.: temperature
sensor GW1x769, or the one on a 6 channel push-button panel GW1x753 or a 6 channel
touch push-button panel GW10741)?
If while programming one of the hourly profiles is configured to manage an Easy probe, the
temperature measured by the probe can be seen on the display by holding down the
button
key in the corresponding profile display page, as indicated in the paragraph Viewing the hourly
profiles on page 13.
What happens to the time band set on the timed thermostat if the BUS power supply
fails and is reset?
If the device is fitted with batteries, the time and date are maintained until the battery charge
runs out.
Is it possible to understand whether the potential-free contact input is open or closed?
The timed thermostat display shows whether the contact is closed or open .