Gewiss Chorus GW 10 764, Руководство по программированию

Страница: 20 / 36

Setting the high temperature protection value /
Used to modify the temperature value associated with the
set-point (if the page visualised relates to the timed
thermostat), or the Value 4 of the hourly profile associated
with the status
(if the page visualised relates to the
hourly timer).
Adjust the value of the high temperature protection /
using the
button keys.
To confirm the set value, press the button key within 30
seconds.
ATTENTION!
The set-point values are subject to the following limitations:
- H
EATING
T
ANTI
-
FREEZE
≤ ≤ ≤
- A
IR
-
CONDITIONING
≤ ≤ ≤ T
HIGH TEMPERATURE PROTECTION
Setting the cyclical profile sending time
Used to set the frequency with which the current value of
the hourly profile is sent. This parameter has an effect only
with the timed thermostat/hourly timer in Automatic
operating mode. Use the
button keys to modify the
sending time (OFF = send only at each variation of the
hourly profile; 1M, 2M, 5M, 10M, 15M, 30M, 45M, 60M =
values expressed in minutes). To confirm the set value,
press the
button key within 30 seconds.
Control parameters
Control logic (2 or 4 way)
Use the or button key to change the type of control
logic of the temperature adjustment system (2 = common
logic; 4 = separate logic). The common control logic is
associated with 2 way systems, with a single valve for
heating/air conditioning.
The separate control logic is associated with 4 way
systems, with two valves, one for heating and the other for
air conditioning. To confirm your choice and move on to the
next parameter, press the
button key within 30 seconds.
USER INSTRUCTIONS
20