Gewiss Chorus GW 10 764, Руководство по программированию

Страница: 14 / 36

USER INSTRUCTIONS
14
Parameter setting
To set the operating parameters of the device, bring up the main timed thermostat page
or the general hourly timer profile on the screen, then press the
button key.
To quit the parameter setting procedure without saving the modifications made on the
current page, just press the
button key again or wait 30 seconds from the last pressure
on the button keys. The parameters that can be modified will depend on the page you
are viewing in normal operation status: if the visible page relates to the timed thermostat,
the Set menu concerning the timed thermostat will be shown; if the visible page is that
of a general hourly timer profile, the Set menu concerning the selected profile will be
shown.
The parameters relating to the timed thermostat / hourly timer are collected into three
functional groups: general parameters, operating parameters, and control parameters.
General parameters
Setting the day
Access to the Set menu is indicated by the word SET on the
display, and by the flashing of the day of the week. Set the
day by means of the
button keys (MON, TUE, WED,
THU, FRI, SAT, SUN).
To confirm your choice and move on to the next parameter,
press the
button key within 30 seconds.
Setting the hour
When the hour figures are flashing, set the hour using the
button keys.
To confirm the set value and move on to the next parameter,
press the
button key within 30 seconds.
Setting the minutes
When the minute figures are flashing, set the minutes using
the
button keys.
To confirm the set value and move on to the next parameter,
press the
button key within 30 seconds.