Gewa Control Omni, Руководство по настройке

Страница: 6 / 52

6
Starting your Control Omni for the first time
1. Insert the enclosed charger into the socket (see fig 1).
2. Charge until the battery indicator shows a green light. It is
important that your Control Omni is fully charged before use in
order for the battery to receive a maximum capacity. NOTE!
The batteries must be charged at regular intervals, once a day.
Do not let the batteries run out completely.
3. Start your Control Omni by pressing the stylus on the ON/OFF button (see fig 2).
Brief Demonstration
Once your Control Omni has started up it takes a few minutes
before it is ready for use.
Select “Go to Start page” when this page is
shown (fig 3). Press the different buttons on the screen to get an
idea of how your Control Omni works (fig 4).
The buttons with symbols represent functions that can be controlled,
e.g. by pressing the telephone buttons you will reach a new page
where you can make a phone call or send an SMS (fig 5) with the
built-in mobile phone. By pressing the TV button the different
functions on the TV can be controlled.
Return to the Start page by pressing the button with the house .
You can continue pressing different buttons to find out how they
work. In order to test how the scanning function works, you can
connect a switch, see fig. 1 on page 5. The default setting for
Control Omni is to use automatic linear scanning with one switch.
Start the scanning by pressing on the switch. The next press
activates the function, which means, for example, that another page
is activated or an IR signal is sent.
The standard pages can be used as a starting point for adapting the
system for different users. Pages can be removed, and new pages
can be added. There are 28 completed pages that can be selected
and added. The images can be changed, functions can be added,
speech can be recorded, etc.
Fig 2
Fig 4
Fig 5
Fig 3