Gewa Control Omni, Руководство по настройке

Страница: 22 / 52

22
Inserting GewaLink channels
GewaLink channels are standard channels that are used in all Gewa remote control units and
receivers. There are 128 GewaLink channels, numbered from 0-127. These channels do not
need to be recorded, they are included with your Control Omni. GewaLink channels must not
be mixed up with codes from products that are purchased in other shops, such as TVs and
DVD players. These use another type of IR channels, described in the previous section
Recording IR Codes .
Insert a GewaLink channel by using the following procedure:
 Pages/buttons  Select page 
browse among the various pages

Select this page  Edit button 
Select the button to be edited
 Function 
Environment

Send IR

GewaLink

type the channel number


Inserting 4096 Codes
4096 code is a specially coded system that is used when extra safety is needed: opening the
flat or house door, for example. In this way, entry by unauthorised persons is prevented.
Once a button has been programmed with a code, it cannot be read, but remains hidden.
Insert a 4096 code by using the following procedure:

Pages/buttons

Select page

browse between the various pages

Select this page  Edit button 
Select the button that is to be edited
 Function 
Environment  Send IR  4096-code 
Type a freely chosen number between
0 and 4095

