Gewa Control Omni, Руководство по настройке

Страница: 13 / 52

13
Sound Settings
The sound can be set individually for different functions
on your Control Omni. The sound is divided into 2 main
groups, so to say. Sound when making phone calls and
sound for system sound. The figure shows different
sound units used.
Settings for sound when making phone calls:

Sound volume for speech

Microphone for speech

Sound volume for ring signal

Type of ring signal
Settings for system sound:

Sound volume for scanning, recorded speech
and pressing the screen.

Sound volume for Alert
Sound settings when making phone calls
It is always the sound in the headset that is adjusted when the headset is connected.
Otherwise the sound in the built-in earphone or the built-in microphone is adjusted. For the
ring signal it is the sound in the loudspeaker that is adjusted. It is also possible to switch off
the microphone and ring signal completely.
Tip! It is possible to create short cuts to the completed pages to quickly be able to adjust the
sound when making phone calls such as off/on microphone and off/on ring signal, see page
26.
Change the sound volume, microphone sensibility and ring signal by using the
following procedure:
 System  Sound setting  Phone
or:
 Phone  Sound
Default setting: 5
Speaker
Port for
headset
Built-in
microphone
Built-in
earphone
Fig 13