Gewa Control Omni, Руководство по настройке

Страница: 16 / 52

16
Backups and Default settings
Making a Backup
It is extremely important to make a back-up after you have
created various pages and adjusted various settings. The
memory card delivered with your Control Omni must be placed
into the compartment on the back of the unit before a back-up
is made, see fig. 14.
If there is a previous backup on the memory card, it will be
overwritten. The back-up can be named by selecting
“Advanced”. If you do not name your file then the name will
automatically be
“Backup” otherwise “ name”. The path to the file is: “Movable
disc\Gewa\Omni\
…” on the memory card.
Make a back-up by using the following procedure:
 System  Back-up  Backup
Resetting from your backup
It is possible to make a reset, provided that you have made a back-up. See section Making a
Backup . The memory card delivered with your Control Omni must be placed into the
compartment at the back of the unit before a reset is made, see fig. 14. If a back-up has been
named it is found in
“Advanced”. See previous section.
Make a reset by using the following procedure:
 System  Back-up  Restore
Default settings
It is possible to return your Control Omni to its default setting in three different ways.
1. Factory restore: Returns the Control Omni to the conditions as they were when
delivered from the factory. Note! Personal images, contacts, SMS, settings, pages etc.
will be deleted. The backup file is not deleted.
2. Standard: The Start page and other pages are returned to the same condition as they
were when delivered from the factory but personal images, contacts, SMS, settings,
etc. will not be deleted. The backup file is not deleted.
3. Blank: Only one start page with four rows and three columns are included in this
alternative. There are no completed pages,
no images and no IR codes. Use “Blank” if
you want to start from scratch and build your own pages. Personal images, contacts,
SMS, settings, etc. will not be deleted. The backup file is not deleted.
Return your Control Omni to its default setting by using the following procedure:
 System  Default setting 
etc.
Fig 14