17
After operation
DANGER
If the equipment is used in contaminated
areas there is a risk of severe injuries or
death caused by harmful substances in or
on the equipment.
Only qualified personnel are allowed to
perform work on contaminated
equipment.
Always wear the protective clothing
prescribed for contaminated areas
when working on the equipment.
Make sure that the equipment is
completely decontaminated before
carrying out any service work.
Follow the pertinent instructions for
handling the hazardous substances in
question.
Removing external dirt deposits
Use fresh water and a cloth to remove dirt and
contaminants from the equipment body.
Purging equipment
Rinse the equipment in order to remove any dirt
particles or fluid residues inside the equipment.
When fixing the cover onto the equipment
body the gasket will be compressed. As a
result the gasket can no longer seal
properly if the cover is taken off again. It is
therefore essential that you always insert a
new gasket whenever you remove and re-
attach the cover.
Attention!
Malfunctions due to dirt deposits on
Thermovit regulator.
Remove Thermovit regulator before
rinsing the equipment.
To remove the Thermovit regulator proceed as
follows:
DANGER
Personnel working on pipes are exposed to
safety risks and may suffer severe injuries,
burns, poisoning or even loss of life.
Make sure that no hot or hazardous
fluid is in the equipment or the pipes.
Make sure that the installation is
switched off and protected against
unauthorised or unintended activation.
Make sure that the equipment and the
pipes have cooled down to room
temperatures.
