Germfree LFGI-3USP Скачать руководство пользователя страница 28

Страница: 28 / 85

Appendices

Warranty Information (2 year standard)

Limited Warranty

GERMFREE warrants equipment to be free from malfunctions and defects in both

materials and workmanship for two years from the original purchase date, unless otherwise

indicated on the sales order/invoice.

Limited Warranty Coverage

THIS LIMITED WARRANTY WILL BE HONORED ONLY WITHIN THE

GEOGRAPHICAL LOCATION/FACILITY THAT GERMFREE EQUIPMENT WAS

PLACED.

GERMFREE will REPAIR or REPLACE GERMFREE equipment if they fail to function

properly during the warranty period, subject to any conditions and/or limitations stated

herein. Such repair service

may

include labor as well as any necessary adjustments and/or

replacement parts.

Such repair or replacement is the sole remedy under this warranty. If replacement parts are

used in making repairs, these parts may be remanufactured, or may contain remanufactured

materials. If it is necessary to replace the entire product, it may be replaced with a

remanufactured product.

Limitations

This warranty does not cover circumstances beyond GERMFREE’s control, nor problems

caused by failure to follow the operating instructions in the GERMFREE equipment

manuals.

THIS WARRANTY DOES NOT APPLY WHEN FAILURE IS DUE TO SHIPPING

DAMAGE, ACCIDENT, ALTERATION, MODIFICATION, UNAUTHORIZED

SERVICE, MISUSE, ABUSE, USE WITH INCOMPATIBLE ACCESSORIES OR

ATTACHMENTS, FAILURE TO FOLLOW GERMFREE’S OPERATION,

MAINTENANCE OR REPACKING INSTRUCTIONS, OR CLAIMS MADE AFTER

THE DURATION OF THIS WARRANTY.

GERMFREE makes no other express or implied warranty for this product. In the event that

the exclusion of any implied warranty is ineffective under the law, the duration of the

implied warranty will be one year from the purchase date.

The option of replacement is GERMFREE’s only obligation. GERMFREE will not be

responsible for any special, consequential or incidental damages resulting from the sale,

purchase, or use of this product, regardless of the cause. Liability for any special,

consequential or incidental damages (including but not limited to loss of revenue or profit,

downtime costs, loss of the use of the equipment, cost of substitute equipment, facilities or

services, or claims of your customers for such damages resulting from the purchase, use or

Содержание LFGI-3USP






















































































Результаты поиска

Содержание LFGI-3USP

Отзывы:

Похожие инструкции для LFGI-3USP

Бренды по названию

Популярные бренды

Germfree LFGI-3USP, Руководство пользователя

Результаты поиска

Содержание LFGI-3USP

Отзывы:

Похожие инструкции для LFGI-3USP

Бренды по названию

Популярные бренды