German RepRap X400 Pro V3, Руководство пользователя

Страница: 8 / 26

X400PRO. QUICKSTART. FUNDAMENTALS.MAINTEN ANCE.TROUBLESHOOTING .
German RepRap X400 Pro V3
User Guide
Rev B01
germanreprap.us 8
E.14. Once three of the four sides of the stand
are assembled, flip it around so your remaining
crossbars can be lined up on the ground.
E.15. Insert shelves.
E.16. IF the stand is wobbly, adjust the legs to make
sure that everything is square.
F. Cut red zip ties.
G. Do NOT remove zip tie on safety
switch.
This zip tie disables the safety switch and allows
us to operate the machine with the door open.
H. Remove buildplate protection.
I. Unpack filament holders.
I.1. The filament holders will sit on the top of the ma-
chine. The filament should be fed through the 2” slot
on the back of the machine.
I.2. The orientation of the filament should take
the path of least resistance.
Setting Up