German RepRap X400 Pro V3, Руководство пользователя

Страница: 18 / 26

X400PRO.QUICKSTART. FUNDAMENTALS. MAINTENANCE.TROUBLES HOOTING.
German RepRap X400 Pro V3
User Guide
Rev B01
germanreprap.us 18
B.5. Apply wet tape to wet ceramic surface.
B.6. Using a credit card as a squeegee, remove bubbles.
Make sure to remove all the window cleaner from under
the tape.
B.7. Allow at least two hours to dry without heat.
In order to use dual extrusion, we need to first ensure
that our nozzles are level to each other and to the bed.
Buildplate P r eparation
A. Mix Bonding Agent
Higher temperature materials require a bonding agent to
help with bed adhesion. Mixing one part water with one
part PVA glue (all multipurpose white glue) gives us a
suitable solution for this application.
B. Apply 50/50 Solution
Using a paper towel, coat the build plate with a thick
layer of this solution and allow the heated bed to quick-
ly dry it up. You should re apply the solution before
every print. It is not necessary to clean off the previous
layer.
C. Clean Up
This water based solution provides for easy clean up. To
clean the buildplate after a print, heat it up and put wa-
ter on the bed to soften up the solution. Use a razor
blade to scrape it off.
To clean the bottom of the part, soak it in water over-
night.
D. Buildplate Prep per Material
Below is a chart for preparing the buildplate based on
material.
Material BP Prep
PLA No 50/50 Solution
ABS 50/50 Solution
PETG 50/50 Solution
Nylon 680 100 PVA Glue
Carbon 20 50/50 Solution
Polycarbonate 50/50 Solution
TPU 93 50/50 Solution
TPU 64 50/50 Solution