German RepRap X400 Pro V3, Руководство пользователя

Страница: 11 / 26

X400PRO. QUICKSTART. FUNDAMENTALS.MAINTEN ANCE.TROUBLESHOOTING .
German RepRap X400 Pro V3
User Guide
Rev B01
germanreprap.us 11
N.2. Using the control panel:
Button press — > Extruder — > Select Extruder 1 — >
Extr. Position.
Quick Settings
Print File
Position
Extruder
>
Turn extr. 2 off
Select extr. 1
Select extr. 2
Extr. position
>
Clockwise pushes and
Counterclockwise pulls.
N.3. As you turn the knob, guide filament through the
top of extruder and into hot end. the wheel. You want
to hold the filament upright so it feeds straight into the
path.
IF the extruder doesn't properly lead the filament to
the hotend, you can adjust the contact pressure by ad-
justing the wheel. The adjusting wheels are mirror im-
ages of each other. The direction in which you turn the
wheel will push or pull the bearing towards or away
from the drive gear, respectively.
M.6. Repeat these steps until the distance from
the nozzle to the plate is uniform.
N. Load filament into left extruder.
N.1. Cut the tip of the filament at a 45° angle and run
it through the feed in the back, along the Teflon tube
until exposed at the other end.
Re-level the bed if you
switch materials.
Loa ding Filament